What does bia stand for in a cisco mac address

WHAT DOES BIA STAND FOR IN A CISCO MAC ADDRESS MANUAL
WHAT DOES BIA STAND FOR IN A CISCO MAC ADDRESS PC

They are displayed using six sets of hexadecimal digits that are usually separated by dashes, colons, or periods. Part 2: Display, Describe, and Analyze Ethernet MAC AddressesД®very device on an Ethernet LAN has a MAC address that is assigned by the manufacturer and stored in the firmware of the NIC. *Mar 1 00:07:59.048: %SYS-5-CONFIG_I: Configured from console by console

Configure and enable the SVI interface for VLAN 1.

Assign a hostname to the switch based on the Addressing Table.

Console into the switch and enter global configuration mode.Д®nter configuration commands, one per line.

In this step, you will configure the device name and the IP address, and disable DNS lookup on the switch. Step 3: Configure basic settings for the switch.

From the command prompt on PC-A, ping the switch address.

Configure the IPv4 address, subnet mask, and default gateway address for PC-A.Step 2: Configure the IPv4 address for the PC. Power on all the devices in the topology.Attach the devices shown in the topology and cable as necessary.Step 1: Cable the network as shown in the topology. For device name and address information, refer to the Topology and Addressing Table.

In this part, you will set up the network topology and configure basic settings, such as the interface IP addresses and device name.

Ethernet cables as shown in the topology.

Console cable to configure the Cisco switch via the console ports.

WHAT DOES BIA STAND FOR IN A CISCO MAC ADDRESS PC

1 PC (Windows 7 or 8 with a terminal emulation program, such as Tera Term).

1 Switch (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable).

WHAT DOES BIA STAND FOR IN A CISCO MAC ADDRESS MANUAL

If you are unsure, ask your instructor.ДЄnswers Note: Refer to the Answers Lab Manual for the procedures to initialize and reload devices. Note: Make sure that the switches have been erased and have no startup configurations. Depending on the model and Cisco IOS version, the commands available and the output produced might vary from what is shown in the labs. Other switches and Cisco IOS versions can be used. Note: The switches used are Cisco Catalyst 2960s with Cisco IOS Release 15.0(2) (lanbasek9 image). You will verify your configurations by testing for network connectivity.ДЄfter the devices have been configured and network connectivity has been verified, you will use various commands to retrieve information from the devices to answer questions about your network equipment. You will configure the switch and PC to match the addressing table. You will cable the equipment as shown in the topology. This lab will explore and analyze the components that make up a MAC address, and how you can find this information on a switch and a PC.

This address is assigned by the manufacturer and stored in the firmware of the NIC. Part 2: Display, Describe, and Analyze Ethernet MAC Addresses Background / ScenarioД®very device on an Ethernet LAN is identified by a Layer 2 MAC address. Part 1: Configure Devices and Verify Connectivity Optional activities are designed to enhance understanding and/or to provide additional practice. 5.1.2.8 Lab вЂ“ Viewing Network Device MAC Addresses Answers Lab вЂ“ Viewing Network Device MAC Addresses (Answers Version вЂ“ Optional Lab)ДЄnswers Note: Red font color or gray highlights indicate text that appears in the instructor copy only.

What does bia stand for in a cisco mac address